How to restore the Airless Bottle when it is used up

About Airless Bottle:

How to restore the Airless Bottle when it is used up? What are the methods?

Airless Bottle's product equipment will bring a better usage model during actual use. However, if such a product equipment is to be used up, various restoration methods may have to be considered. The product equipment is used up. How to perform effective restoration afterwards.

1. Remove the pump head: When cleaning the Airless Bottle product, the first thing you have to do is to remove all the pump heads inside, because after this product is used up, the piston will completely push up, so that the product inside can be squeezed. In this case, the piston needs to be removed. The only way is to open the pump head first.

2. Clean the bottle: In the process of product processing, cleaning the bottle is also more important. After disassembling, all the bottles must be cleaned, and it is convenient to put them into the new cosmetics. You can choose to rinse the bottle with water repeatedly, and you can pour out all the water and place it in a ventilated place to air dry.

3. Press the piston: Airless Bottle is a device that can find the piston after drying. If the Airless Bottle itself is relatively small, you can gently press it down with your fingers. The entire Airless Bottle has a very large capacity. You should use wooden sticks or other harder ones. The objects are all pressed to the bottom of the piston. Pay attention to their bottoms during the pressing process. They will have spring devices, so you must use moderate force when pressing.

What kind of experience does the Airless Bottle device have during the pressing process? How to restore the bottle when it is used up? In addition to the above methods, you can also choose to install the pump head. Don't be too slow when installing, or it will overflow easily.